Processing and production methods and processes of silicone phone cases

Nowadays, silicone phone cases come in a variety of colors and patterns, which are highly sought after by young men and women. Holding a silicone phone case gives a fashionable feeling. Do you know why there are so many color patterns on silicone phone cases? What is the production process of silicone phone cases?

1. Appropriate release agents can be added during the mixing of raw materials to package products, which can quickly demold and save some pickup time

2. Adding a rapid vulcanizing agent to the raw materials enhances the fluidity of the product. A product that originally required 100 seconds can be reduced by about 30% under the same temperature and pressure conditions

3. Adjust the temperature and pressure of the machine. Generally, the temperature of the machine is relatively stable, so the temperature can be gradually increased. The higher the temperature, the faster the fixed line speed of the product, which can reduce unnecessary time, provided that the quality of the product is guaranteed

4. Changing the feeding method during operation can also affect the demolding time of the product. For example, long strip shaped raw materials can be appropriately replaced into sheets to fill the mold cavity faster and increase the speed

5. Change the exhaust frequency and formation of the vulcanization machine. During the exhaust process, the speed of the machine is slower when closing the mold up and down. If the product is not particularly complex, the secondary exhaust can be reduced and the product can be maintained.

6. Put effort into the mold and open more discharge slots to keep the excess material discharged. If there are a large number of product orders, the number of holes in the mold can be increased as much as possible to ensure processing efficiency.

After the preparation of the above steps, a perfect silicone phone case was born.

Firstly, the rubber mixing process is carried out, during which various colored adhesives are added to meet the required color of the product. After high-temperature molding and hydraulic forming, the shape of the product is obtained through processes such as oil spraying, screen printing, pad printing, laser, heat transfer printing, etc., to create the appearance structure!