Why are silicone toys so obsessed by consumers?

Toys are used as a way of entertainment and decompression. Today's society is under great pressure, and both adults and children have the habit of playing with toys. Of course, there are also many types of toys, and I believe that my friends have a certain understanding. Today I want to introduce silicone toys. The silicone material is a silicone toy made from natural rubber, which can withstand high temperature and cold, generally in 60~250℃ maintains good elasticity.

Silicone toys usually use soft materials, and the transparent silicone raw materials will not cause harm to children's skin. For example, the same toy is made of two materials, silicone and plastic. There may be a bit of a raw edge on the toy, but the silicone material will not hurt the baby, and the plastic is usually very hard, so it could cut a small child's hand.

With the development of science and technology, the production process of silicone toys has also been improved. Safety and environmental protection reflect the importance of technical support. Especially for the experience of silicone gifts, the colorless and odorless characteristics are still the core. The competitiveness of children's toys will at least improve the experience of consumers to a certain extent. Whether the material of children's toys is safe is a top priority.

It is undeniable that today's children's toys have developed in a variety of ways, both in terms of appearance and safety of materials, and they have been comprehensively improved. If these objectively existing advantages can be brought into full play, then in silicone toys In the process of promotion and popularization, more optimistic harvests can be produced, and this has more ideas for highlighting the core role of the material's environmental protection and safety.

Silicone toy features:

1. Non-toxic and harmless, with strong chemical inertness;

2. The material is soft, not easy to be deformed, and has good resilience;

3. Low viscosity, good fluidity, and easy operation;

4. Moderate hardness; generally 30-60A

5. Good tensile strength; 3.4-14.7Mpa

6. The shrinkage rate is small, generally less than 2‰;

7. Acid and alkali resistance, aging resistance, high and low-temperature resistance -40-230℃;

8. The more times the mold is turned, the longer the service life, the better.