What are the characteristics of rubber products

1, rubber products in the production of molding, need to go through a relatively large pressure to press, because there is no way to eliminate the cohesion inside, so, in the molding molding from the mold may have a relatively strong instability, it also has shrinkage does not give the situation, after a period of time, such instability can be alleviated, so, In the design of both formula and mold must be careful calculation, otherwise it may lead to product size is not stable.

2, because rubber products are a kind of elastomer, belonging to the hot melt hot set, so, it is forming when the temperature requirements are relatively high, and even because of climate change or indoor temperature and lead to its forming effect is therefore affected, so, in the production of temperature and humidity to do appropriate adjustment.

3. It is made of rubber raw materials through dense refining. When mixing rubber, it is necessary to carry out formula design according to the characteristics of rubber products, so as to determine the hardness of products.

4, it has aging test, such a test pass after can pass, if there is a wrinkle, discoloration or other abnormalities can not be tested.

The above is the relevant situation of the characteristics of rubber products, its own characteristics are more obvious, but, in the use of rubber products must be used according to the situation, to ensure that the use of the correct method.