Simply remove stains from acrylic products in just 5 steps.

As for the characteristics of acrylic high transmittance, exquisite and not picky, processing is very simple and other advantages, in our daily life is widely used. Common products include tissue boxes, acrylic picture frames, fish tanks, cosmetics and household accessories. Then you may encounter the problem of how to clean these acrylic products. The following 5 steps Clean acrylic for an easy way to remove stains.

1. Ink stains: rinse with clean water; It can also be used to rub the solution of one part alcohol and two parts soap repeatedly, also has a good effect.

2. Acrylic products attached to the surface of dust, garbage use a soft wipe, flannel, sponge dipped in clean water, gently wipe. If dust and garbage may contain hard foreign bodies, it is recommended to gently brush off before wiping.

3. Red ink stains: new stains are washed with cold water, soaked in warm soap for a while, and then rinsed with clean water; Old stains can be washed with detergent, then rub with 10% alcohol solution can be removed.

4. For oil layer and other difficult to remove dirt, it is recommended to use warm water with neutral detergent to wipe. Acrylic will crack after being corroded by solvent, please make sure that neutral detergent does not contain solvent before use.

5. Do not use solvents such as toluene for the dirt that is difficult to remove such as tight adhesive tape, which may cause cracking; Do not use a scraper, such as scraping, will cause scratches; Under normal circumstances, wipe with a soft cloth dipped in warm water, you can remove the residual glue, stick especially tight, you can use plastic cleaner coated on the cloth, gently wipe the surface, remove it.