On the importance of the appearance and interior of silicone products.

I believe that many silicone products manufacturers in the silicone industry do not want their own processing and production of products reduced to the bottom of the market, so many silicone products manufacturers are making a lot of efforts for the product, so that their own production of silicone products shake into customers, which has a certain correlation with the production strength of the manufacturer, if a market praise, For well-known manufacturers, their products will never be ignored in the market, so they do not want their products to be greatly discounted in the market, then they still have to start from the quality.

Regardless of the quality of any silicone products, there are two important factors affecting the good and bad of the product, that is, the inside of silicone products and the appearance of silicone products:

First of all, the perception of the product on the appearance is very important, it must make people look like they want to reflect the desire to have, which shows that the color of a silicone product is very important, and try to make the color more vivid when debugging the color.

Secondly, feel not to mention, the product can not feel rough, the surface smoothness must be high and feel comfortable, so raw materials and oil injection is very important, raw materials can not appear debris can not choose expired or inferior raw materials processing. The size of the raw edge of the separation line affects the main external reason of the product, so the development of the cutting edge and the mold is also very important.

It is said that a good thing not only looks at his appearance, whether the inside is the same, such as our people, the appearance and the inside are two alike, so silicone products are the same. First of all, whether qualified products can be made in raw materials, whether the content of silicone oil in raw materials will be too much, and silicone oil affects the aging rate of products and ash viscosity and so on. The use of vulcanizing agent can make the performance of silicone products change, the use of different vulcanizing agent mixing will lead to product deformation, performance off the shelf, lack of toughness and so on. So in summary, if silicone products manufacturers can do a good job inside and outside the product, then the sales and popularity of natural products in the market will increase!

The problem of how to improve the appearance brightness of silicone products can be done from the surface of the mold. Usually, sandblasting the surface of the mold will make the surface of the product smoother, and the mold electroplating is the way to make the appearance of the product brighter! Whether the surface process of the mold is qualified, generally the smooth side of the grinding machine is used to ensure that the surface parallelism is within the specified size, such as the use of too long to cause scratches on the surface, the surface can be sandblasted to maintain the smoothness of the product! Add the appropriate vulcanizing agent to ensure that the mixed rubber is more brilliant, and the product is sprayed with oil surface treatment process to make the appearance more smooth!